SURFACE FLUORESCENT LIGHTING
A range of quality surface mounted light fittings and attachments designed to be both aesthetically pleasing and durable.

All products are designed to comply with all relevant British and European lighting standards and are tested as part of our rigorous quality control procedure.

Where appropriate attachments have been independently tested for compliance to LG3 Category 2.

A full range of control gear can be installed including Energy saving High frequency with products available for T5 lighting systems.
 
Two ranges of surface mounted luminaires offering an alternative where recessed fittings cannot be used, suitable for commercial, industrial, leisure and public buildings.
The profile surface has angled sides to give a pleasing aesthetic appearance, whilst the box version offers a more traditional finish.
Both luminaires are suitable for use on most types of ceilings where an adequate fixing point is available, and are also suitable for continuous mounting in corridors or passages.
Switch start control gear supplied as standard.
TECHNICAL DETAILS

Boxed version constructed from 0.8mm mild steel polyester powder coated highly reflective white.
Control gear options include switch start, electronic start, low loss, high frequency and dimming all rated at 240v 50Hz as standard (other voltages available on request) and includes earth protection lead for aluminium louvres.

Profile version constructed from 0.7mm chamfered steel body pre-coated in highly reflective white, finished with stylish flame retardant ABS plastic end caps.
3 hour maintained emergency back-up, available on request. Nylon louvre retaining straps and fused terminal blocks fitted as standard.
Manufactured to conform to British Standard BS4533 and issued with CE markings.